Radio Shack ET-929 - Manual (Page 17)

17
4. Enter the number and any tone and
pause entries (see “Using Tone Ser-
vices on a Pulse Line” on Page 15
and “Entering a Pause” on
Page 18).
Note: Each tone or pause entry us-
es one digit of memory.
5. Press MEM. NAME? appears. If you
do not want to put in a name, skip to
Step 7.
6. To enter a name, use t or s to select
the characters and or to move
the cursor.
Repeatedly press t to see the char-
acters in alphabetical order. (The
display shows uppercase letters
first, then lowercase letters, num-
bers, and special characters.)
Notes:
• Press s to see the characters in
reverse alphabetical order.
• You can hold down s or t to scroll
rapidly through the characters.
• If you make a mistake, move the
cursor over the error, then enter
the correct character, or press
DELETE to delete a character.
7. Press MEM . LOCATION? appears.
8. Enter the memory location number
(01–20) where you want to store the
number. The handset beeps and
STORING briefly appears.
For each stored number, write the per-
son’s or company’s name next to the ap-
propriate location number on the
supplied memory directory sticker. (Use
a pencil in case you need to change the
number later.) Peel the backing from the
sticker and attach it to the phone as
shown.
To replace a stored number, simply store
a new one in its place.
43-1099.fm Page 17 Tuesday, August 17, 1999 4:19 PM