Radio Shack ET-929 - Manual (Page 13)

13
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see “Dialing from a Caller ID
Record” on Page 21) or to correctly
store a number from a record into a
memory dialing location (see “Storing a
Caller ID Record to Memory” on
Page 22), you must store your local area
code in the ET-929’s memory. Then,
when you dial from a Caller ID record,
the ET-929 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset. If appears,
press TALK to turn it off.
2. Press FUNCTION twice. AREA CODE
and 1- appear.
Note: If an area code is already
stored, it appears after the
1– .
Press DELETE three times to erase
it.
3. Enter your 3-digit area code, then
press MEM . The handset beeps and
STORING briefly appears.
4. Return the handset to the base to
store the new area code.
To delete an area code, follow Steps 1
and 2, then press
MEM without entering
a new area code. DELETING appears.
SETTING CALLER ID WITH
CALL WAITING
If you subscribe to Caller ID with Call
Waiting, you can set the ET-929 to show
Caller ID information for an incoming call
even while you are already on the
phone.
Follow these steps to turn Caller ID with
Call Waiting on or off.
1. Lift the handset. If appears,
press TALK to turn it off.
2. Press FUNCTION three times.
CIDCW (Caller ID Call Waiting), the
current setting, and ON-1 OFF-0
appear.
3. Press 1 to turn this feature on, or 0
to turn it off.
4. Press MEM . The handset beeps and
briefly displays the new setting.
5. Return the handset to the base to
store the new setting.
talk
talk
43-1099.fm Page 13 Tuesday, August 17, 1999 4:19 PM