RIDGID OL50145MW - Manual (Page 5)

5
SYMbOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
Read The Operator’s Manual
Risk of Bursting
Risk of Fire or Explosion
SYMbOL NAME DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Type of current
Double-insulated construction
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
Precautions that involve your safety.
Do not spray flammable liquid in a confined area. Spray area
must be well ventilated. Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 5 feet from the spraying
area and all explosive vapors.
Wet Conditions Alert
Class II Construction
Hz Hertz
A Amperes
V Volts
Hot Surface
To reduce the risk of injury or damage, avoid contact with any
hot surface.
Risk to Breathing
Air obtained directly from the air compressor should never be
used to supply air for human consumption.
Pinch Point
To reduce the risk of injury or damage, avoid contact with
any pinch point.
Alternating Current
Safety Alert
Do not adjust regulator to result in output pressure greater than
marked maximum pressure of attachment. Do not use at pressure
greater than 45 PSI.
Risk of Electrical Shock
Hazardous Voltage: Disconnect from power source before servic-
ing. Compressor must be grounded.