Regency Sunrise U32S-NG5 - Manual (Page 26)

26 U32S-5 FPI Direct Vent Gas Insert
9) Remove the base cover by lifting up from the back and maneover
out.
Base Cover
14) Remove the fan access plate by undoing the 10 screws shown.
10) Remove the back panel by manoeuvring it up and out of the fi rebbox.
as shown below.
11) Remove 1 screw holding the clip securing the right side panel
12) Remove the side panel.
13) Repeat above 2 steps to remove the left side panel.
MAINTENANCE
Fan access plate
15) Remove the 3 screws securing the burner bracket as shown
below.
16) Move the pilot assembly out of the way - be careful of the wires
leading from the pilot assembly.
Pilot assembly wires