Roland PICZA LPX-60 - Manual (Page 40)

3. Creating 3D Data 38
3-4 Finishing the Data
You take the data from basic scanning and modify it to produce finished data that has the form you want.
Selecting and Scanning a Specific Area
After the basic scanning, you can select specific areas and performing additional scanning (rescanning). The available types
of rescanning are as follows.
Rescan
You use rescanning when you want to increase the number of measuring points (scan points) and enhance the degree of
completion of the 3D data.
Line Scan/Point Scan
You use line scanning and point scanning when you want line-segment or point data to serve as supplemental data for
three-dimensional modeling operations using CAD or computer-graphics programs.
Perform coarse scanning of
the entire object.
Rescan required
areas in detail.
You can reproduce detailed
surface patterns.
Even when holes are present... The holes are sealed, yielding the
same shape as the original!
...you rescan just
these areas.
Perform line scanning with Dr.
PICZA3... ...and re-create the
curved surfaces with the
3D CAD program!
Perform point scanning with Dr.
PICZA3... ...and re-create the
curves with the 3D CAD
program!