Roland PICZA LPX-60 - Manual (Page 28)

2. Preparing the Machine 26
2-4 Installing and Setting Up the Software
Installing the Programs
Install the following programs.
Dr.PICZA3 This program enables you to perform scanning using the machine.
3D Editor This program enables you to edit scanned 3D data.
Procedure
1 Make sure the window shown in the figure is dis-
played.
2 Follow the on-screen instructions to start installa-
tion and setup.
3 When the window shown in the figure appears, click
"Next." Thereafter, follow the on-screen instruc-
tions.
When all installation and setup finishes, the final win-
dow appears.
4 Click [Close].
This completes the installation of the included software.
Select [LPX-60].
Make sure that all the
check boxes be selected.
Clicking the button
starts installing.