Do not connect the usb cable at this point – Roland PICZA LPX-60 User Manual
Page 21
19
2-3 Connecting the Cables
2. Preparing the Machine
DO NOT connect the USB cable at this point.
You connect the USB cable only when instructed to in the
procedures for installing the driver. Starting driver installation
with the cable connected may cause installation to fail and make
the machine unusable.
Make the connection according to the procedures in "2-4 In-
stalling and Setting Up the Software."
Secure the cable for the AC adapter and the included USB cable in place using the cable clamps.
Place the AC adapter on the AC adapter holder.
The "Roland" logo is
visible.
Orient the AC adapter as shown in the figure.
Power cord
Cable clamp
Electrical outlet
USB cable
AC adaptor
Computer
USB port
AC adaptor holder
When you connect the power cord to the machine, the power button and movement lights flash momentarily, but this
is normal and does not indicate a problem.