Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting - Manual (Page 16)

16 Operation
Follow these steps to access services.
1. Lift the handset.
2. Press MENU . Return Call , Repeat
Dial , and Cancel CW appear.
3. Press the number or VOL/CID
8
or
9
to select the service you want to use.
4. Press TALK . Talk and the selected ser-
vice number appear. The service dials
the number.
Note: You can display the programmed ser-
vice number of each calling feature. At Step
2 above, press
7
to view the number and
6
to return to view the name display.
Editing Advanced Service Names
and Numbers
You might need to change the number
stored in any of the three service locations,
for example, if your phone company uses dif-
ferent number sequences from the pro-
grammed ones.
Follow these steps to edit a key sequence.
1. Lift the handset.
2. Hold down MENU until Select to
Edit and a list of calling features
appears.
3. Choose a calling feature by pressing a
number ( 1 – 3 ) or VOL/CID
8
or
9
.
4. Press SELECT/CHANNEL . A menu listing
Edit , Restore , and Go back
appears. Press VOL/CID
8
or
9
to
highlight the desired option then press
SELECT/CHANNEL to choose it.
Edit — Service name appears.
Edit the service name and press
SELECT/CHANNEL . Then, Service
number appears. Edit the number and
press SELECT/CHANNEL . Enter the
name and number as described in Steps
5 through 8 of “Storing a Number and
Name in Memory.”
Restore — the display prompts you to
confirm the restoration. If you want to
return to a preprogrammed calling fea-
ture, press
VOL/CID
8
to move the cur-
sor to Yes , then press SELECT/
CHANNEL . The phone beeps, and Ser-
vice Setting Restored appears.
Go Back — returns you to the list of
service numbers.
MEMORY DIALING
You can store up to 20 phone numbers and
names in memory, then dial a stored number
by entering its memory location number.
Each number can be up to 20 digits, and
each name can be up to 13 characters.
Storing a Number and Name in
Memory
Notes:
• The phone beeps five times and exits
the storing process if you wait more than
20 seconds between each keypress.
• If you receive a call during memory
entry, the phone exits the storing pro-
cess.
1. Lift the handset.
43-5521.fm Page 16 Monday, June 5, 2000 12:29 PM