Ricoh G413 - Manual (Page 9)

VRS Getting Started Guide
Kofax Image Products 5
Step 2. Install the Adrenaline Hardware Accelerator
This section explains how to install the Adrenaline Hardware Accelerator.
Note: To run VirtualReScan successfully, you need to install only the software provided on the
VRS installation CD. Do not install the software provided on the Adrenaline Hardware
Accelerator CD.
Compatibility with Current Accelerators and Engines
We recommend that you install the Adrenaline Hardware Accelerator on a PC with no other
Kofax hardware accelerators. If necessary, remove the older Kofax accelerators before you install
the Adrenaline Hardware Accelerator.
Precautions
When handling your Adrenaline Hardware Accelerator, follow these precautions:
• Keep the accelerator in its original shipping package until you are ready to install it.
• Power off your PC before installing the accelerator.
• Before handling the accelerator, discharge static electricity from yourself and the work
area by touching the metal chassis of the PC.
• Hold the accelerator by the edges; do not touch its metal surface.
Before installing the accelerator, make sure your PC is powered off. Then, install the accelerator
in any available PCI slot. Be sure to use the screws to secure it into place.
Figure 5. Installing an Adrenaline Hardware Accelerator in Your PC