Raymarine ST80 - Manual (Page 9)

6 ST80 Navigator Keypad Operation Manual
Chapter 3: Problem Solving & Maintenance
3.1 Problem Solving
Keypad does not operate - power LED not illuminated
• Make sure the cable connecting the keypad to SeaTalk is connected
properly.
• Make sure the cable is not damaged. Replace the cable if it is
damaged.
Navigator operates all Masterview display heads
• Display heads and keypad are not linked. Please refer to the
Masterview manual for linking details.
Navigator does not operate Masterview display head
• Keypad has been previously linked to another Masterview. Enter link
mode to create a link between the keypad and display head.
3.2 Maintenance
• Periodically examine cables for signs of damage. Replace any
damaged cables.
• Always fit the protective sun cover when the keypad is not in use.
• If the keypad needs to be cleaned, use a moist lint-free cloth.
Chemical cleaning agents or abrasive compounds must not to
be used.