beautypg.com

4 web-based user interface, Access, Tasks – RCA SpeedTouch 580 User Manual

Page 31: Web-based user interface, Chapter 4

background image

Chapter 4

Web-Based User Interface

E-DOC-CTC-20050126-0005 v1.0

29

4 Web-Based User Interface

Embedded pages

The SpeedTouch™ comes with embedded HTML pages, providing an interface to the
software installed on the device. It allows easy setup and management of the
SpeedTouch™ via your web browser from any PC connected to the SpeedTouch™.

Access

To access the pages:

1

Open your web browser.

2

In the address bar type your SpeedTouch™’s IP address, by default that is

192.168.1.254

, and press Enter.

3

Enter your SpeedTouch™ security user name and password.

4

The SpeedTouch™’s home page will be displayed in your browser window.
From here - depending on the rights of your user account - you have access to
the other pages.

Tasks

Amongst others you can:

View the SpeedTouch™’s current settings and status.

Configure the SpeedTouch™ to connect to your Service Provider with the
settings provided.

Set the SpeedTouch™’s firewall to work with specific applications.

Set up security features.

Enable remote management access.

Back up your configuration settings.

Reset the SpeedTouch™’s default settings.

Update the SpeedTouch™’s firmware.

Using the web pages

When making changes to the SpeedTouch™ configuration via the web pages, the
configuration is stored automatically whenever you click the Apply button..
For more information on the embedded web pages, go to the Help link in the upper
right side of the notification and navigation area of the SpeedTouch™ web pages, or
refer to the SpeedTouch™ User’s Guide.

The recommended screen resolution is 1024 by 768 pixels.

The default user name is Administrator and the default password is
blank.