Launching the easy setup wizard, Setting up internet connection, Launching the easy setup – RCA SpeedTouch 580 User Manual
Page 28: Chapter 3
Chapter 3
Internet Access in No Time
E-DOC-CTC-20050126-0005 v1.0
26
Launching the Easy
Setup wizard
It is always possible to launch the Easy Setup wizard from within the embedded web
pages. Proceed as follows:
1
.168.1.254
.
2
In the menu click SpeedTouch.
3
In the Pick a task... list click Set Up.
Setting up Internet
connection
In the Easy Setup wizard:
1
Click Next to proceed. If for some reason you want to abort the wizard, click
Cancel
.
2
Choose the Service provided by your ISP (Router or Bridge); then click Next.
3
Select the appropriate VPI/VCI - and, if required, the Connection Type (PPPoE
or PPPoA) - provided by your ISP; then click Next.
4
Fill in the Internet Account settings (PPP user name and Password) provided by
your ISP. Click Next.
5
Fill in the SpeedTouch™ Security user name and Password.
6
In the next screen you can review your settings, before to start the
configuration of your SpeedTouch™. If something is missing or incorrect, click
Back
. To confirm the settings, click Start.
7
Please wait until the configuration has been done, and then click Finish. After a
while you will be returned automatically to the Welcome page. Click on the
bottom link to go to the SpeedTouch™ pages or select Don’t show this page to
access the Internet via your default home page.
The factory default user is ‘Administrator’. Its password is blank,
meaning you do not need to enter anything in the password field. It is
advisable to specify another Administrator user name and password to
protect your SpeedTouch™ from security violation, as described in