RCA VR618HF - Manual (Page 22)

Blank Search
The VCR searches for blank portions of the tape that are more than six seconds in length.
1. Insert the tape and press STOP.
2. Press SEARCH on the remote three times to display the
BLANK SEARCH
menu on the TV screen.
3. Press FF to begin searching for six seconds of blank tape.
A message appears on the screen if a blank area is not
found.
4. Press STOP to stop blank searching.
BLANK SEARCH
Press FF to begin
Searching for blank
section of tape.
Press SEARCH to exit
20
Playing a Tape
Using the Playback Features
Go-To Search
The go-to search feature allows you to locate a counter reading on the tape and
automatically begins playing back the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote twice to display the GO-TO
SEARCH
menu on the TV screen.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REW or FF to go to
0:00:00
Press SEARCH to exit
3. Press number buttons to enter the hour(s) and minute(s) of
the time counter reading you want the VCR to search.
Press CLEAR to correct an entry.
4. Press FF on the remote or FWD on the VCR to search
forward or REW to search in reverse.
The time counter is displayed in the upper right corner of
the TV screen during search.
5. Press STOP to stop go-to searching.
VCR
TRACKING
SLOW
POWER
REW
PLAY
FF
RECORD
STOP
PAUSE
INPUT
PREV CH
F.ADV
CLEAR
MENU
1
2
3
4
5
6
7
8
9
0
DISPLAY
SPEED
TV•VCR
TV
MUTE
VOLUME
SEARCH
PROG
CHANNEL