RCA VR618HF - Manual (Page 14)

12
Using the Remote Control
Buttons
VCR
TRACKING SLOW
POWER
REW PLAY FF
RECORD STOP PAUSE
INPUT PREV CH
F.ADV
CLEAR MENU
1 2 3
4 5 6
7 8 9
0
DISPLAY
SPEED
TV•VCR TV
MUTE
VOLUME
SEARCH
PROG
CHANNEL
TV
Turns on a compatible RCA,
ProScan, or GE TV and sets the
remote to control the TV.
Used with POWER button to turn
on another brand of TV, other
than RCA, when the remote is
programmed to control that TV.
See page 11.
VCR
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control the VCR.
CHANNEL Up or Down
Selects next higher or lower
channel in the VCRÕs channel
memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries
when setting the clock or VCR for
a VCR Plus+ or timer recording.
DISPLAY
Shows VCR operating displays
on the TV screen.
Displays the time counter.
F.ADV (Frame Advance)
Lets you view one frame with
each press of the button while the
tape is paused.
FF (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Searches the picture in forward
motion during playback.
INPUT
Turns the line input on or off.
L1
appears in VCRÕs display
panel and VIDEO appears on TV
screen.
Line input refers to the signal
coming from the component
connected to the audio/video
input jacks on the back.
MENU PROG
Displays the VCR MAIN MENU
on the TV screen.
Removes a menu from the
screen.
Used to program the VCR.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then
press the other two numbers.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off VCR when remote is set
to control the VCR.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two
channels.
Component Buttons
Press one of the buttons to set the remote to operate that component.
VCR Function Buttons
Press VCR to set remote to control the VCR to use the function buttons.