Radio Shack 43-3544 User Manual

Page 14

Installation

—

When you first use the phone

after charging or recharging the
battery pack

—

If the battery pack is completely

discharged

—

If the base loses power for

about an hour while the handset
is away from it

While holding

PAGE

, return the

handset to the base for about 3
seconds to reset the security
access-protection code.

• If the battery pack becomes weak

during a call, the handset beeps
every 3 seconds and

Bemý8Wjj[ho

flashes. When this happens, you
cannot make a call until you
recharge the battery pack.

• If the display is blank and the

phone does not work, recharge the
battery pack. (The battery power
might be too low to light the
display.)

• About once a month, fully

discharge the battery by keeping
the handset off the base until

Bemý

8Wjj[ho

flashes on the display.

Otherwise, the battery pack loses
its ability to fully recharge.