Radio Shack 43-3544 - Manual (Page 10)

10
Installation
compatible modular jacks that are
compliant with Part 68 of
FCC Rules.
±
1P"C"&GUM"6QR
1. Plug one end of the supplied long
modular cord into the TEL LINE
jack on the bottom of the base.
2. Plug the modular cord’s other end
into a modular phone line jack.
3. Insert the supplied AC adapter’s
barrel plug into the DC IN 9V jack
on the bottom of the base.
4. Route the adapter’s cord through
the strain relief slot on the base,
then plug the adapter into a
standard AC outlet.
1P"C"9CNN"2NCVG
1. Plug one end of the supplied short
modular cord into the TEL LINE
jack on the bottom of the base.
Then insert the supplied AC
adapter’s barrel plug into the
DC IN
9V jack on the bottom of the base.
±
"016'"
±
"
The USOC number of
the jack to be installed is
RJ11C (or RJ11W for a
wall plate jack).