Radio Shack 43-3544 User Manual

Page 13

stallation

when the handset is on the base, even
if the battery pack is not connected.

1. Press down and slide off the

battery compartment cover.

2. Lift the battery pack out of the

compartment.

3. Plug the battery pack’s connector

into the socket in the compartment
(the connector fits only one way),
then place the battery pack in the
compartment.

4. Replace the cover.

To charge the battery pack, place the
handset on the base. The CHARGE/IN
USE indicator on the base lights and

JejWb0&&

appears on the handset

display.

Recharge the battery pack when

Bemý

8Wjj[ho

flashes on the display.

If you have trouble replacing the battery
pack, take the phone to your local
RadioShack for assistance.

Rý

4GEJCTIKPI"VJG"$CVVGT["2CEM

• The phone might not work and you

might hear an error tone when you
press

TALK/FLASH

in any of the

following situations:

"9#40+0)

Dispose of the old
battery pack promptly
and properly. Do not
burn or bury it. See
“Recharging the Battery
Pack” for additional
information on proper
battery handling.