Radio Shack 43-3544 - Manual (Page 11)

11
In
stallation
2. Route the
adapter and
modular
cords
through
the grooves
on the back
of the base as
shown here.
3. Plug the short modular cord into
the wall plate jack, then align the
base’s keyhole slots with the wall
plate studs and slide the base
down to secure it.
4. Plug the adapter into a standard
AC outlet.
1P"C"9CNN
To mount the phone directly on a wall,
you need two screws (not supplied)
with heads that fit into the keyhole slots
on the back of the base.
1. Drill two holes 3 15 /
16
inches (100
mm) apart. Then thread a screw
into each hole, letting the heads
extend about
1 / 8 inch (3 mm) from
the wall.
AC Adapter Cord
Modular
Cord