Roland KC-550 - Manual (Page 9)

9
Panel Descriptions
9. STEREO LINK
Stereo playback is enabled simply by connecting two KC-550
or KC-350 units with a single audio cable (phone type).
* For details on the Stereo Link function, refer to “Stereo Link”
(p. 12).
STEREO LINK OUT Jack
Connect this jack to the STEREO LINK IN jack on a sub (L)
KC-550/KC-350 when using a Stereo Link configuration.
This output jack provides 0 dBu line level output.
When a cable is connected to the STEREO LINK OUT jack,
the right-channel input signals are output from the internal
speakers. The left-channel input signals are output from the
STEREO LINK OUT jack to the other KC-550/KC-350.
STEREO LINK IN Jack
Connect this jack to the STEREO LINK OUT jack on the main
(R) unit (the other KC-550/KC-350) when using a Stereo Link
configuration.
This accepts level input of 0 dBu.
Only the STEREO LINK IN input signals are output from the
internal speakers.
10. SUBWOOFER OUT Jack
This lets you play even more powerful bass by connecting a
powered subwoofer.
Provides full-range output, at an output level of +4 dBu.
You can use the MASTER CONTROL knobs ( LOW , MIDDLE ,
HIGH , and VOLUME ) to adjust the tone and volume level.
* SHAPE switch do not affect SUBWOOFER OUT .
11. AUX IN Jacks
These are RCA phono type input jacks.
You use these to connect equipment such as CD and MD
players, and have them sound along with the equipment
connected to CH 1 through CH 4 .
They accept level input of -10 dBu.
* To adjust the volume level of equipment connected to the AUX
IN jacks, use the controls on such equipment.