Radio Shack ET-652 - Manual (Page 6)

6
• The USOC number of the two-line
jack to be installed is RJ14C
(RJ14W for a wall plate). The USOC
number of a single-line jack is
RJ11C.
Plug one end of the supplied two-line
telephone cord into the jack on the back
of the phone. Then plug the cord’s other
end into a modular telephone line jack.
If you use two single-line jacks, you
must connect the lines with an optional
two-line coupler (such as RadioShack
Cat. No. 279-401).
Note: If you use the ET-652 with only
one line, set
LINE 2 DEFEAT on the back
of the phone to OFF . This turns off Line
2’s status indicator.
Connecting the Handset
Plug the supplied coiled handset cord
into the jacks on the handset and the left
side of the phone.
Note: Your local RadioShack store sells
a variety of longer coiled handset cords,
which are especially useful when you
mount the phone on the wall.
LI NE 1- RINGE
R - LI NE 2
OFF LO HI
OFF LO HI
MODE
PULSE -
TONE
NORM -
STORE
Two-line
Coupler
LI NE 1- RINGE
R - LI NE 2
OFF LO HI
OFF LO HI
MODE
PULSE -
TONE NORM -
STORE
VOLUM E
MIN
MAX
LINE 1- RINGE
R - LINE
2
OFF LO HI OFF LO HI
TEL LINE
ADJUST
LINE 1
LINE 2 DEFEAT
LINE 2 OFF - ON
DC 9V + ! -
43-652.fm Page 6 Friday, August 13, 1999 11:00 AM