Rikaline BT-Q880 - Manual (Page 3)

Next Generation GPS 32-Channel Bluetooth GPS BT-Q880 Operating Manual
QSTARZ Technology Inc. 6F-2, No. 160, Ming Chuan E. Road, Sec. 6, Taipei,Taiwan
Tel: ++886 2 2792 0061 Fax: ++886 2 2792 0062 E-Mail: [email protected] Web: www.Qstarz.com
3
AA. Quick Use for First Time Setting
Please read this instruction carefully before use.
A.0 Standard Package
GPS Unit + Lithium-ION Rechargeable Battery + Cigarette Adapter + Travel Charger + Warranty Card +
Easy-Place Pad + Quick Guide.
A.1 Fully charge the battery for at least 10 hours before using
A fully charged battery can last for 10-12 hours continuously operation facilitating the low power consumption
design at 80mA. Please put the switch at “OFF” or “AUTO” position if you will not use the device for an
extended period of time.
A.2 Activate the Bluetooth function in your PDA or PC
Before activating the Bluetooth function in your PDA/PC, please Switch ON BT-Q880Receiver for paring and
check if your device is equipped with Bluetooth function. If not, you may need to acquire an optional CF/SD
Bluetooth card or Bluetooth dongle to enable Bluetooth function to your PDA/PC.
NOTE: The pairing procedure is required for the first time only.
A.3 Automatically create a shortcut in Bluetooth Manager window
After the pairing complete, the system will automatically create a quick connect device, BT-Q880 in Bluetooth
Manager. In further use, you just need to click this device to connect our Bluetooth Receiver.
A.4 Check the Serial Port in Bluetooth Setting
After pairing with the Receiver complete, please click “Serial Port” to confirm the COM port. If you use PDA/PC
to pair the Receiver, please select “Outbound COM port”.
A.5 Set correct Serial Port in your map software
Activate your map function and select the correct serial port.
A.6 Switch off the Bluetooth function
Switch off the Bluetooth function before you turn off your PDA/PC, and Switch off Receiver will disconnect the
GPS function. If the BT GPS is on “AUTO” position, you do not need to take extra action.
A.7 Turn off your PDA or PC
A.8 Others
A.8.1 POWER STATUS
A.8.2 Pass Word The pass word for paring is “0000”.
Function
ON OFF AUTO
ON In use Recharging In use
OFF
GPS not powered Recharging
Completed
Non Recharging
GPS not powered
FLASH
Low power
Not Applicable
Not Applicable
LED