Radio Shack 43-329 - Manual (Page 21)

21
Te
le
ph
on
e
O
pe
ra
tio
n
Multiple Handset Use
You can use up to two system handsets at a time on an outside call. If
a handset is already on a call and you would like to join the call, press
/FLASH or on another handset to join the call.
To end the call, press OFF/CLEAR or place the handset in the telephone
base or charger. The call will not be terminated until all handsets hang up.
You can buy additional expansion handsets for this telephone base. You can
register up to 12 handsets to the telephone base.
The first nine handsets that you register are named HANDSETS 1-9. Use
the handset number to intercom and transfer calls. Although the names for
handsets 10-12 appear in their displays as 10-12, when you intercom or
transfer to one of them, you must use *0 for HANDSET 10, *1 for HANDSET
11
, and *2 for HANDSET 12.
Intercom
Use the intercom feature for conversation between two system handsets.
Press INT on your handset when not in use.
If you have a two-handset system, your handset
screen shows CALLING OTHER HANDSET.
If you have more than two handsets, your screen
shows INTERCOM TO:. Use the dialing keys to select
the other handset. Your handset screen shows CALLING
HANDSET X
.
The other handset rings and its screen shows either
OTHER HANDSET IS CALLING
or HANDSET X IS CALLING.
To answer the intercom call, press /FLASH, , INT,
or any dialing keys (0-9, #, *) on the other handset. Both
handsets now show INTERCOM.
To end an intercom call, press INT, OFF/CLEAR, or place the handset
back in the telephone base or charger.
1.
•
•
1.
2.
CALLING
OTHER HANDSET
CALLING
OTHER HANDSET
OTHER HANDSET IS
CALLING
OTHER HANDSET IS
CALLING