Radio Shack ET-1755 User Manual

Page 6

%100'%6+0)"61"#016*'4"

2*10'"

The phone is equipped with a

DATA

jack so you can connect

another phone or an answering machine to LINE2. You can
plug one end of a modular cord into either

LINE L1/L2

DATA

at the right side of the phone, then plug the other

end into the jack of another phone or an answering
machine. You cannot use LINE 2 while another phone or
answering machine is connected to

DATA

and in use. LINE

1 and LINE 3 still function normally. When you are finished
using another phone or answering machine, LINE 2 will be
available.

%100'%6+0)"6*'"*#0&5'6"

%14&

Plug the supplied coiled handset cord into the jacks on the
handset and the left side of the phone. Your local
RadioShack store sells a variety of longer coiled handset
cords, which are especially useful when you mount the
phone on the wall.

.+0'"+0&+%#6+105

The line indicators show you which line is in use or on hold.
If a line is in use, the indicator lights. If a line is on hold, the
indicator flashes.

'0#$.+0)"#0&"&+5#$.+0)"

6'.'2*10'".+0'5

1. Press and release

STORE

. The LOWER indicator

flashes twice.

2. Press and release

HOLD

3. Press and release the line button to select the

telephone line you want to enable.

To disable the telephone line, repeat Steps 1–3.

+PFKECVQT

.KPG

Off

Not in use

On steadily

In use

Flashing rapidly

Ringing

"016'"

•

If you do not have three
subscribed telephone lines for
the phone, be sure to disable
the unused line.

•

You can enable or disable the
telephone lines with the handset
on or off the hook.