Radio Shack TAD-739 - Manual (Page 14)

14
To play only new messages, hold down
the desired
PLAY button for 2 seconds.
The TAD tells you how many new mes-
sages you have in that line and plays
them.
After all messages play, the TAD says,
“End of messages.”
To replay a message during playback,
press
REPEAT . The current message
starts again from the beginning.
To return to a previous message, hold
down
REPEAT until you see the desired
message number.
To skip to the next message, press SKIP .
To pause during playback, press the se-
lected line’s
PLAY button. PA (pause)
appears. To resume playback, press the
selected line’s
PLAY button again within
60 seconds. Otherwise, the TAD stops
playback, announces “End of messag-
es,” and displays the total number of
messages.
To quickly play a message, hold down
SKIP . The playback speed increases, al-
lowing you to quickly scan a message or
move to any place within it. To resume
normal playback, release
SKIP .
To stop playback at any time, press
STOP . The TAD beeps and resets to an-
swer calls.
DELETING MESSAGES
To delete the current message during
playback, press
DELETE . The TAD an-
nounces “Erase.” and beeps, then plays
the next message.
To delete all messages in a line after
playback, hold down
DELETE until the
TAD says “Erase messages” and beeps.
dL appears and the selected line indica-
tor next to each PLAY button that has
“played” messages flashes. Press the
selected line’s
PLAY button. The TAD
sounds a long beep to confirm that all
messages in the selected line are delet-
ed.
Notes:
• The TAD does not delete unplayed
messages. If you press DELETE
when you have unplayed messag-
es, the TAD sounds four beeps.
• To cancel the delete function soon
after you press DELETE , press
STOP/TIME SET . The TAD sounds
four beeps.
43-739.fm Page 14 Friday, August 13, 1999 2:00 PM