RCA DVD/VCR - Manual (Page 57)

Chapter 6 53
Additional Information
• You must connect the DVD/VCR to the TV using A/V cables (not provided) to hear true stereo sound
during playback. Go to page 7 for instructions.
The stereo Audio is too noisy
• The stereo signal is weak. Set the BROADCAST TYPE: to MONO.
• Press either the CHANNEL – or + button on the front of the unit (or CH +/- on the remote) to
minimize picture noise.
Cannot copy discs to video tape
• You can’t record DVD discs onto videocassettes because the discs are encoded with anti-copy
protection.
Disc won’t eject
• When you put a disc into the player, the player may take up to 15 seconds to read the disc. You
won’t be able to eject the disc during this time. Wait 15 seconds and try again.
I get an “Incompatible file” message when I try to play JPEG files
• Some JPEG files might be too large to be displayed, or a large file is blocking the player from
displaying all the other JPEG files on the disc.
I forgot my password
• You need to reset the unit to its factory defaults to reset the password and enter a new one. See
page 40).
16166400.06 Additional 5/29/03, 10:02 PM 53