RCA DVD/VCR - Manual (Page 16)

12 Chapter 1
Connections and Setup
MONTH : JULY
DAY : 5 SAT
YEAR : 2003
TIME : 2 : 15 AM
SELECT
TO EXIT PRESS
ADJUST
AUTO CLOCK SET : OFF
DAYLIGHT SAVING: ON
TIME ZONE: EASTERN
• If you choose AUTO, the VCR sets the time zone using information from the broadcast signal.
6. When finished, press MENU to exit.
7. Turn off the VCR to automatically set the clock.
Manual Clock Set
1. Press MENU to display the VCR Main Menu.
2. CLOCK should already be highlighted, so press OK (the
Clock menu appears).
3. MONTH: should already be highlighted. Press the right
arrow button to set the month.
4. Press the down arrow button to highlight DAY: , and
press the right arrow button until the correct day is
shown. The day of the week displays automatically.
5. Press the down arrow button to highlight YEAR: , and
press the right arrow button until the correct year is
shown.
6. Press the down arrow button to highlight TIME: , and
press the right arrow button until the correct time is
shown.
7. Press the down arrow button until DAYLIGHT SAVING: is
highlighted, and press the right arrow button until the
desired setting is shown (ON, or OFF).
• If you choose ON, the VCR adjusts the clock when the
Daylight Savings Time begins or ends.
• Remember that AUTO CLOCK SET must be set to OFF
and DAYLIGHT SAVING and TIME ZONE can’t be set to
AUTO when setting the time manually. Otherwise, the
time will be reset when the VCR is turned off.
16166400.01 Connections 5/29/03, 10:02 PM 12