Radio Shack AFX-300 - Manual (Page 33)

33
PROGRAM COMMAND DESCRIPTIONS
Each of the following sections describes a different AFX-300
special feature and explains how to turn on, turn off, or change
that feature when you follow the steps listed in “Basic Pro-
gramming Instructions.” The beginning of each section in-
cludes this basic information:
Touch-Tone Command(s) — lists the specific touch-tone
command sequence you enter to turn on, turn off, or change
that feature while programming the AFX-300.
AFX-300 Response — tells you how the AFX-300 responds
when you correctly enter the appropriate touch-tone com-
mand sequence.
Default Setting — lists the default setting for that feature.
Note: For all special features except “Changing the Access
Code” and “Changing the Ring Number Setting,” the same
touch-tone command is used to both turn on
and turn off that
feature. You can tell whether the feature is turned on or off by
the AFX-300’s response (two or three beeps).
43-1245.fm Page 33 Wednesday, August 18, 1999 9:51 AM