Radio Shack ET-925 User Manual

Page 9

4. Insert the supplied AC adapter’s

barrel plug into the

DC IN 9V

jack

on the back of the base.

5. Route the adapter’s cord through

the right side of the strain relief
slot on top of the base and
through both the upper and lower
grooves on the bottom of the
base.

6. Align the keyhole slots with the

mounting screws and slide the
base downward to secure it.

Strain Relief

Slot

Upper
Groove

Lower
Groove

7. Plug the modular cord into a mod-

ular phone line jack.

8. Press and lift out the handset

holder, rotate it 180°, then snap it
back into place so it holds the
handset.

9. Plug the adapter into a standard

AC outlet. The POWER indicator
on the base lights.

10. Lift the base’s antenna to a verti-

cal position.

43-1095.fm Page 9 Tuesday, August 17, 1999 3:37 PM