Radio Shack ET-925 - Manual (Page 12)

12
SETTING THE RINGER
On the Handset
The ringer on the handset is turned on
whenever the handset is off the base.
You can select one of four different
ringer tone/volume settings on the
handset while the phone is not in use.
Press VOLUME to hear the current
ringer setting.
Repeatedly press VOLUME until you
hear the desired ringer setting. Each
time you press
VOLUME , the ringer
changes in this order:
High-volume, high-pitch
Low-volume, high-pitch
High-volume, low-pitch
Low-volume, low-pitch
On the Base
The RINGER setting affects only the
ringer on the base. To turn off the ring-
er on the base, set
RINGER on the back
of the base to OFF .
To turn on the ringer on the base, set
RINGER to either LO or HI as desired.
When you place the handset on the
base and set
RINGER to OFF , the ET-
925 does not ring when it receives a
call. However, other phones connect-
ed to the same phone line still ring.
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset that has a
3 /
32
-inch (2.5
mm) plug. We recommend Ra-
dioShack Cat. No. 43-194, which is
specially designed for use with the ET-
925.
43-1095.fm Page 12 Tuesday, August 17, 1999 3:37 PM