Ricoh Caplio R2 - Manual (Page 92)

90
Setting the Frame Rate
The number of shot frames per second (frame rate) in Movie Mode
can be selected from 30 and 15.
1.
Switch the Mode Selector to 3.
2.
Press the M button.
The shooting setting menu appears.
3.
Press the " button to select [FRAME RATE]. Then press the
O or $ button.
4.
Press the !" button to select [30
FPS] or [15 FPS].
5.
Press the O or # button.
This completes the frame rate setting.
6.
If the # button was pressed in
Step 5, press the M button.
The shooting setting menu disappears and
the LCD monitor displays the set values.
The set values are used for shooting until they are changed the next time.
Note
The movie recording time depends on the capacity of the SD memory card.
The recording time is as shown below.
IN 32MB 64MB 128MB 256MB 512MB 1GB
15FPS 320 X 240 1 min
23 s 1 min
27 s 2 min
57 s 5 min
59 s 11 min
56 s 24 min
4 s 46 min
17 s
30FPS 320 X 240 42 s 44 s 1 min
30 s 3 min
2 s 6 min
4 s 12 min
13 s 23 min
30 s
15FPS 160 X 120 5 min
1 s 5 min
18 s 10 min
51 s 21 min
57 s 43 min
44 s 88 min
7 s 169 min
27 s
30FPS 160 X 120 2 min
38 s 2 min
48 s 5 min
45 s 11 min
37 s 23 min
10 s 46 min
42 s 89 min
48 s