Ricoh Caplio R2 - Manual (Page 26)

24
Turning the Power On/Off
To turn the power on:
1.
Slide the power switch to open
the lens cover.
After the start sound, the auto-focus/flash
lamp blink for several seconds.
Using the Camera in Playback Mode
If the Playback button is pressed with the lens cover closed, the power is
turn on in Playback Mode and the camera can be used in this mode.
To turn the power off:
1.
Slide the power switch to close
the lens cover.
Caution
It takes longer from power-on until the camera becomes ready for shooting when the flash is
enabled than when it is disabled.
Note
Auto Power Off
If the camera goes unused for a set period of time, it will automatically turn itself off to save
power. To continue on using the camera, slide the power switch to close the lens cover once
(power-off) and slide it again to open (power-on).
Reference
For how to change the Auto Power Off setting, see P.112.