Roland MPX-50 - Manual (Page 53)

51
Specifications
Main Unit Specifications
Printing method Impact (single-dot configuration)
Resolution 203 dpi
Printing area 80 mm x 80 mm
(3-1/8 in. x 3-1/8 in.)
Printable material Gold, silver, copper, platinum, brass, aluminum, iron, stainless steel, etc.
(Vickers hardness [HV] of the marking surface must be 200 or less.)
Loadable material size Maximum 90 mm x 90 mm x 20 mm (thickness)
(3-1/2 in. x 3-1/2 in. x 3/4 in.)
Printing direction Unidirectional printing or bidirectional printing
(Selectable with Windows driver)
Printing speed 15 mm/sec (9/16 in./sec)
Interface Parallel (in compliance with the specification of Centronics)
Power consumption Exclusive AC adapter (DC+19V 2.1A)
Acoustic noise level Under 70 dB (A) (According to ISO 7779) (*)
Operation temperature 10 to 30˚C (50 to 86˚F)
Operation humidity 35 to 80% (no condensation)
External dimensions 236 mm (W) x 315 mm (D) x 216 mm (H)
(9-5/16 in. (W) x 12-7/16 in. (D) x 8-9/16 in. (H))
Weight 5.5 kg (12.1 lb.)
Accessories AC adapter, power cord, Roland software package for METAZA CD-ROM,
leveler, marking material for testing and user's manual
Interface Specifications
[Parallel]
Standard : In compliance with the specification of Centronics
Input signal : STROBE (1 BIT), DATA (8 BIT)
Output signal : BUSY (1 BIT), ACK (1 BIT)
I/O signal level : TTL level
Transmission method : Asynchronous
(*) Acoustic noise level measured when the Windows driver is set at default values, the cover is closed, and white-fill
marking on brass is performed.