Roland MPX-50 - Manual (Page 28)

26
Part 2 Performing Marking
3-3 Starting Marking
Operate Dr. METAZA to send marking data to Metaza.
1 If the power to Metaza is off, press the [STANDBY]
key to switch it on.
Power-on initialization is performed, then operation
stops.
2 From the [File] menu, click [Print].
The [Print] dialog box appears.
3 Click the drop-down arrow for "Name," then click
[Roland METAZA MPX-50].
If this is already selected, then go on to the next step.
4 Click [Properties].
The [Roland METAZA MPX-50 Properties] dialog
box appears.
5 Click [Image Correction] tab.
6 Click the drop-down arrow in the figure, then click the
composition of the workpiece.
In this example, choose [Brass].
7 Click [OK].
The [Print] dialog box appears again.
8 Click [OK].
The marking data is sent to Metaza, and marking
starts.