Roland MPX-50 User Manual
Page 29
27
Part 2 Performing Marking
Stop Marking
To stop marking partway through, carry out the steps below.
1
Click [Start].
Point to [Settings] and click [Printers].
2
Double-click the [Roland METAZA MPX-50] icon.
3
From [Printer] menu, click [Purge Print Jobs] or
[Cancel] to stop sending data.
4
Even when transmission of marking data is stopped,
Metaza doesn't stop right away.
This is because the data that has already been sent still
remains in Metaza.
Wait for Metaza to Metaza moving, then press the
[STANDBY] key.