Radio Shack TAD -797 - Manual (Page 16)

16
2. Press 2 or t to select CIDCW (Caller
ID/Call Waiting).
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Return the handset to the base to
store the new setting.
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see “Dialing Numbers from a
Caller ID Record” on Page 26) or to cor-
rectly store a number from a record into
a memory dialing location (see “Storing
a Caller ID Record to Memory” on
Page 27), you must store your local area
code in the TAD-797’s memory. Then,
when you dial from a Caller ID record,
the TAD-797 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and press FUNC-
TION .
2. Press 3 (or t twice) to select Area
Code .
3. Press SELECT , then enter your 3-
digit area code. If you make a mis-
take, repeatedly press
or to
move the cursor over the incorrect
digit, then enter the correct number.
Note: If an area code is already
stored, it appears on the display. To
delete the area code, press
DELETE
three times. Or, simply enter a new
area code to overwrite the old one.
4. Press SELECT to store the area
code.
5. To clear the display when you finish,
press FUNCTION or return the hand-
set to the base.
43-797.fm Page 16 Monday, August 16, 1999 9:20 AM