Raritan Computer UST-IP - Manual (Page 43)

C HAPTER 4: A DMINISTRATIVE F UNCTIONS 37
Time and Date
Current Date and Time on the UST-IP unit are listed on this screen. Once saved, Time and Date changes
will not take effect until UST-IP is restarted.
• New Date / New Time: To manually input changes to current date and time values.
• Adjust for daylight savings time: Toggle between YES and NO to reflect whether your country or
state follows the daylight savings time procedure.
• Get Time From SNTP Server: Indicates whether UST-IP time/date should be automatically
synchronized with the time/date of an external SNTP server.
- Primary Server IP Address: IP address of first SNTP server to attempt time
synchronization.
- Secondary Server IP Address: IP address of second SNTP server to query, if primary server
is unavailable.
- User standard UDP port 123: Allows user to modify UDP port used for SNTP time
synchronization. Consult your SNTP server administrator to determine if this value should be
adjusted.
• Time Zone: Select the time zone in which your UST-IP unit is physically located.
Press <Ctrl+S> to save changes or <Esc> to cancel changes, and return to the Configuration Menu. Saved
Radius Configuration changes will not take effect until UST-IP is restarted.