Renesas H8S2215R - Manual (Page 12)

• Select the Device on the RSK from the drop
down list.
• In the sub pane, select the kernel version that
ends in ‘.RSK’.
• Press .
If you have copied the kernel to another location to modify for
a different crystal frequency, the device will not be listed in the
sub pane. In this case:
• Press and navigate to your
modified kernel.
• Select E8DIRECT as the communication Port
• Press .
• The default settings are suitable for an
un-modified RSK board.
• Confirm the Crystal Frequency matches the
board.
• Confirm the main clock frequency multiplier.
• Confirm the peripheral clock multiplier.
• Press .
10