Ryobi ELL0001 - Manual (Page 9)

8 9
OPERATION
WARNING:
Do not allow familiarity with tools to
make you careless. Remember that
a careless fraction of a second is
sufficient to inflict serious injury.
APPLICATIONS
You may use this laser level for the following
purposes:
n
Hanging pictures
n Hanging wallpaper and wallpaper bor-
ders
n Lining up floor or wall tile
n Lining up electrical outlets
n Decorative angles for faux painting
n Putting up chair rail
NOTE: This product is not a rotary laser. It
will need to be releveled for each direction it
is pointed to.
INSTALLING BATTERIES
See Figure 3.
The battery compartment is located beneath
the ridged area at the front of the laser level.
To open:
n
Push the battery cover plate straight up
and remove.
n Install two AA batteries according to
polarity indicators inside the battery
compartment.
Fig. 3
BATTERY COVER PLATE
TO
REMOVE
TO
INSTALL
BATTERY
COMPARTMENT
BATTERIES
WARNING:
When turning on the laser level, always
protect the eyes of yourself and those
around you. Never point the laser beam
at anyone’s face, including your own.
NOTE: The horizontal and vertical vials are
to be used for reference only. This tool is not
intended to be a standard box beam level.
n Place the battery cover plate back onto
the laser level and slide down to secure.