beautypg.com

Safety rules, Warning, Caution – Ryobi ELL0001 User Manual

Page 3

background image

2

3

WARNING!

READ AND UNDERSTAND ALL IN-

STRUCTIONS. Failure to follow all

instructions listed below, may result in

electric shock, fire and/or serious per-

sonal injury.

CAUTION:

Use of controls or adjustments or perfor-

mance of procedures other than those

specified herein may result in hazardous

radiation exposure.

CAUTION:

The use of an optical instrument with this

product will increase eye hazard.

The laser guide radiation used in this laser

level is Class IIIa with < 5mW and 635 nm

wavelengths. These lasers do not normally

present an optical hazard although staring at

the beam may cause flash blindness.
n

Avoid direct eye exposure when using

the laser and do not project the laser

beam directly into the eyes of others.

Serious eye injury could result.

n

Do not remove or deface any prod-

uct labels. Removing product labels

increases the risk of exposure to laser

radiation.

n

Do not place the laser level in a position

that may cause anyone to stare into the

laser beam intentionally or unintention-

ally. Serious eye injury could result.

n

Do not operate the laser level around

children or allow children to operate the

tool. Serious eye injury could result.

n

Always turn the laser level off when not

in use. Leaving the tool on increases the

risk of someone inadvertently staring into

the laser beam.

n

Do not operate the laser level in com-

bustible areas such as in the presence

of flammable liquids, gasses or dust.

n

Do not use push pins unless you plan to

affix the base to a soft wood, wallboard,

or other easily penetrated surface. This

could result in injury because the pins are

very sharp instruments.

n

Always ensure the laser beam is aimed

at a surface without reflective proper-

ties. Shiny reflective materials are not

suitable for laser use.

n

When using the base, always check

to be sure the laser level is securely

seated. Damage to the tool and/or seri-

ous injury to the user could result if the

laser level falls.

n

All repairs should be made by an autho-

rized service representative or the laser

manufacturer.

n

Handle the laser level with care. Treat it

as you would any other optical device such

as a camera or binoculars.

SAFETY RULES