Raypak 302-902 - Manual (Page 39)

39
HI DELTA OUTDOOR VENT INSTRUCTIONS
1. Turn off the power and shut off the gas to heater.
Heater as shipped
2. Slide the vent collar from kit over the collar on heater
as shown in Fig. 1.
3. Drill a 3/16” pilot hole into the heater collar through
each of the holes on the lower vent collar. See Fig. 1.
Fig. 1
4. Take four of the self-tapping screws from the kit and
screw into the holes as shown in Fig. 2.
Fig. 2
5. Slide tinnerman clips over the small bracket as shown
in Fig. 3.
Fig. 3