Radio Shack ET-521 - Manual (Page 28)

28
STORING CALLER ID
RECORDS IN A MEMORY
LOCATION
1. Press CALL ID . xx New CID Total
= xx appears.
2. Repeatedly press REVIEW s or t un-
til you see the desired Caller ID
record.
3. Press MEM . PROG appears.
4. If you want to enter a name for the
displayed number, press SETUP
then enter the name.
5. Press MEM , then enter the memory
location number. The ET-521 beeps
several times. The stored memory
location number and
Save OK ap-
pear.
DIALING NUMBERS FROM
A CALLER ID RECORD
1. Press CALL ID , then press REVIEW
s or t until you see the phone num-
ber you want to dial.
2. Press CALLBACK. The ET-521 dials
the displayed phone number.
If the phone number’s area code
does not match the area code you
stored, the system automatically di-
als a 1 before dialing the displayed
area code and 7-digit phone num-
ber. (See “Setting the Area Code”
on Page 16.)
DELETING CALLER ID
RECORDS
The ET-521 lets you delete individual
Caller ID records or all Caller ID records
at one time.
Follow these steps to delete a single
Caller ID record.
1. Press CALL ID then repeatedly
press REVIEW s or t until the Caller
ID record you want to delete
appears.
2. Press DELETE . Clear ? and DEL
appear.
3. Press DELETE again.
Follow these steps to delete all Caller ID
records.
1. Press CALL ID then press DELETE .
Clear ? ALL? and DEL appear.
2. Press DELETE . Clear OK appears.
43-1021.fm Page 28 Tuesday, August 17, 1999 9:14 AM