Radio Shack ET-521 - Manual (Page 23)

23
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To do
so, press
REDIAL to enter a 3-second
pause after entering the access code. P
appears. For a longer pause, press RE-
DIAL again.
Recalling Numbers Stored in
Memory
1. Press MEM , then SETUP . The phone
displays M - - .
2. Enter the 2-digit memory location
number. The stored phone number
appears.
Or, to scroll through all of the memo-
ry locations, repeatedly press
RE-
VIEW s or t until the desired number
appears.
Note: TOP OF LIST or END OF
LIST appears when you reach the
beginning or end of the memory lo-
cations.
3. To review the stored name, press # /
or / . If no name is stored,
No name appears.
Dialing a Memory Number
1. Press TALK . The TALK indicator
lights.
2. When you hear the dial tone, press
MEM then enter the 2-digit memory
location number, or press REVIEW s
or t to select the desired memory lo-
cation number. The memory loca-
tion number and the stored phone
number appear on the display.
3. Press CALLBACK. The phone dials
the displayed phone number.
555-1234
M01
43-1021.fm Page 23 Tuesday, August 17, 1999 9:14 AM