Radio Shack ET-521 - Manual (Page 24)

24
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as alternate long distance
or bank by phone), store each group of
numbers in its own memory location.
When calling special services, dial the
service’s main number first. Then, at the
appropriate place in the call, press
MEM
and SETUP , enter the number for the lo-
cation where the additional information is
stored, and press
CALLBACK .
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand pe-
riods. Remain on the line to explain the
reason for your call.
Deleting Information in a
Single Memory Location
1. Recall the memory location contain-
ing the information you want to
delete.
2. Press DELETE . Clear ? and
DEL appear.
3. Press DELETE again to confirm de-
letion. The next higher memory lo-
cation number and the number
stored there appear. If no number is
stored in that location,
No number
appears.
To exit without deleting the informa-
tion, wait 30 seconds without press-
ing any button.
Deleting Information in All
Memory Locations
1. Press MEM , then SETUP .
2. Repeatedly press REVIEW s or t un-
til TOP OF LIST or END OF LIST
appears.
3. Press DELETE . Clear ? ALL? and
DEL appear.
4. Press DELETE again to confirm de-
letion. Clear OK appears briefly.
To exit without deleting all of the
memory location information, wait
30 seconds without pressing any
button.
43-1021.fm Page 24 Tuesday, August 17, 1999 9:14 AM