RCA Scenium LCDX3022W - Manual (Page 10)

Connections & Setup
6 Chapter 1 Graphics contained within this publication are for representation only.
Connect Your Cable
Connect your cable or antenna to the ANTENNA/CABLE jack on the bottom panel of the TV
using a coaxial cable.
ANTENNA/
CABLE
SUBWOOFER
OUT
R L AUDIO
OUT
AUDIO OUTPUT
CABLE
OFF-AIR ANTENNA
OR
Choose Your Connection
There are several ways to connect your television, depending on the components you want to
connect and the quality of the signal you want to achieve. The following are examples of some
ways to connect your TV. Choose the connection which is best for you.
Connection to AV Components
Using the DVI Jack
Connect a component, such as an HD receiver, to the TV using the DVI jack. Connect one end
of a DVI cable (not supplied) to the DVI jack on the bottom of the TV and the other end to the
DVI Out jack on the back on the component. Then connect the audio cables to the DVI AUDIO
IN jacks (R and L) next to the DVI jack on the TV and to the Audio Out jacks on the
component.
Note: When using the DVI jack to receive your signal, all necessary information is
transferred from the receiver to the TV. Therefore, there is no need to make adjustments
in the Main Menu.
DVI
AUDIO
IN
R L
ˇ˝ ˇ˝ ˇ˝ ˇ˝ˇ˝ ˇ˝ ˇ˝ ˇ˝ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝
HD receiver (RCA Scenium ATSC21, for example)
16278190.01 Connections 4/13/04, 4:32 PM 6