Rosewill RXS-4324 - Manual (Page 29)

Internet Camera RXS-3323/RXS-4324 User Manual
1. MAC address: Displays the Ethernet MAC address of the device. Note that user can not change it.
2. Obtain IP address
automatically
(DHCP):
DHCP: Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this
device can not get an IP address within limited tries, the device will assign a default IP
address, 192.168.0.100, by itself as the default IP address.
3. IP address:
4. Subnet mask:
5. Gateway:
If you do not select Obtain an IP address automatically, then you need to enter these
network parameters manually.
6. Obtain DNS from
DHCP:
DNS: Stands for Domain Name System.
Enable this checked box when a DHCP server is installed on the network and provide
DNS service.
7. Primary DNS:
8. Secondary DNS:
If you do not select Obtain DNS from DHCP, then you need to enter these parameters
manually.
9. HTTP Port: The device supports two HTTP ports. The first one is default port 80 and this port is
fixed.
This port is very useful for Intranet usage. The second HTTP port is changeable. Users
29