RCA 9V345T - Manual (Page 7)

Chapter 1: Getting Started
5 Graphics contained within this publication are for representation only. Your unit might differ slightly.
ON OFF
VOL
MUTE GO BACK
CH
CLEAR MENU
PRESETS
CC
SLEEP
INFO
SKIP
1 2 3
4 5 6
7 8 9
0 INPUT
OK OK
Remote Control Buttons
When operating the remote, point it directly at the front of the TV. Objects between the remote and the
remote sensor can block the signal to the TV.
0-9 (Number) buttons Press to access any channel number. To select a channel, press two number buttons.
For example, press 0 then 6 for channel 6. To select a 3 digit number, press and hold number button 1 until
1— appears on the screen. Then press the other two numbers.
Arrow buttons (up, down, left, right) Use the arrow buttons to move through the on-screen menu system.
ON•OFF Turns the TV on or off.
CC This button has no functionality with this product*.
CH +/- (Channel) buttons Press to select the next higher or lower channel in memory. You can add or erase
channels in memory as desired.
CLEAR Press to clear the screen of all on-screen displays.
GO BACK Pressing this button switches the TV back to the last tuned channel. This is useful if you want to
watch two channels. Select the first channel you wish to watch. Then select the other channel by pressing
two number buttons. The TV changes back and forth between the two channels each time you press this
button.
INFO Brings up the channel banner.
INPUT This button has no functionality with this product.
*Closed captioning is accessible from the menu system, go to page 8 for more information.
Continues on next page...
Arrow
buttons
OK
button
16394960.01 5/10/04, 5:23 PM 5