Radio Shack ET-1101 - Manual (Page 13)

13
2. When the service answers, press
TONE . Any additional numbers you
dial are sent as tone signals.
3. After you complete the call, press
TALK or return the keypad to the
base. The phone automatically resets
to pulse dialing.
USING PAGE/INTERCOM
You can send a page and use the ET-
1101 as an intercom between the base
and the headset/keypad. This is useful if
the headset/keypad is away from the
base and you want to locate it, or if you
want to have a conversation between
someone using the headset/keypad and
someone at the base.
Paging the Headset/Keypad
To page the person who has the headset/
keypad or to locate the headset/keypad
when the phone is not in use, press
IN-
TERCOM on the base. The keypad rings
three times and its INTERCOM indicator
flashes. To have the keypad ring for a
longer time, hold down
INTERCOM for 3
seconds. The keypad rings about 9 times.
To answer the page, press INTERCOM on
the keypad before the INTERCOM indica-
tor stops flashing (about 6 seconds).
When you finish your intercom conversa-
tion, press
INTERCOM again to hang up.
Paging the Base
To page the base, press INTERCOM on
the keypad. The base rings nine times
and its INTERCOM indicator flashes.
To answer the page, press INTERCOM on
the base before the INTERCOM indicator
stops flashing (about 18 seconds). To end
the intercom conversation, press
INTER-
COM again.
INTERCOM
INTERCOM Indicator
43-1101.fm Page 13 Friday, July 9, 1999 9:32 AM