Radio Shack ET-1101 - Manual (Page 12)

12
USING REDIAL
To quickly redial the last number dialed,
press
TALK then REDIAL .
Notes:
• The redial memory holds up to 32
digits, so you can redial long-distance
as well as local numbers.
• The redial memory can also store
tone entries (see “Using Tone Ser-
vices On a Pulse Line”) and pause
entries (see “Entering a Pause in a
Memory Number” on Page 15).
USING MUTE
To talk to someone else in the room with-
out the person on the other end of the
phone line hearing your conversation,
press
MUTE .
Press MUTE again to resume your phone
conversation.
USING FLASH
FLASH provides the electronic equivalent
of a switchhook signal for special phone
services such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH to answer an incoming call
without disconnecting the current call.
Press
FLASH again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect your current call.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these tone
services by following these steps.
1. Dial the service’s main number.
MUTE
FLASH
TONE
43-1101.fm Page 12 Friday, July 9, 1999 9:32 AM