Radio Shack STAV-3780 - Manual (Page 7)

7
Preparing Your Receiver
Connecting the Front Speakers
Follow these steps to connect the right speaker to the receiver’s right
FRONT SPEAKERS terminals.
1. Press open the receiver’s FRONT SPEAKERS R (+) red lever and insert
the ridged or color-coded conductor’s end into the small hole.
Press the lever closed to secure the conductor.
2. Press open the receiver’s FRONT SPEAKERS R ( – ) black lever and insert
the other conductor’s end into the small hole. Press the lever
closed to secure the conductor.
3. Connect the ridged or color-coded conductor’s loose end to the
right speaker’s positive (+) terminal.
4. Connect the remaining loose conductor to the right speaker’s neg-
ative (–) terminal.
Repeat Steps 1–4 to connect the left speaker to the receiver’s FRONT
SPEAKERS left terminals.
FRONT SPEAKERS
CENTER
SPEAKER
SURROUND
SPEAKERS
L R
L R
L R
L R
A
B
A
B
SPEAKER IMPEDANCE
6 Ω OR 8 Ω ~16 Ω / SPEAKER
CAUTION:
PRE OUT
SUB
WOOFER
CENTER
PRE OUT
AUDIO
IN
AUDIO
IN
Amplified
R
Surround Speakers Right Left
Subwoofer
Right Front Speakers
Center Speaker
Left
Right Left
Note: Be sure you connect the re-
ceiver’s right and left positive (+) and
negative (–) terminals to the speaker’s
corresponding right and left positive (+)
and negative (–) terminals.