Radio Shack STAV-3780 - Manual (Page 33)

33
Using the Remote Control
TV and CATV Operation
Note: You must have programmed the code for your TV or CATV into
the remote control for these functions to work.
Before operation, press TV (or the one connected to your TV or CATV) to
select TV/CATV operation.
POWER Turns on/off the TV or CATV.
CHANNEL Press to change the tuner channel.
TV FUNC (TV only) Selects the TV’s input mode, antenna or line input.
TV VOL Adjusts the volume.
Number Buttons Selects channel directly. On some TVs, you might need to press
DISC after entering the channel number.
On some models, the functions of the buttons are different.
POWER Turns the power on/off.
Moves cursor left. ( )
| Moves cursor up.( ▲ )
Moves cursor right. ( )
Moves cursor down. ( ▼ )
Decreases volume.
Increases volume.
| Selects the TV’s input mode, antenna or line input.
ENTER - enters the selected cursor position.
Number Buttons Selects channel directly.
DISC Turns the menu on/off.
Satellite Receiver Operation
Note: You must have programmed the code for your SAT receiver to the
remote control for these functions to work.
Before operation, press TV (or the one that you connected to your SAT
receiver) to select SAT receiver operation.
POWER Turns the power on.
Moves cursor left. ( )
| Moves cursor up.( ▲ )
Moves cursor right. ( )
Moves cursor down. ( ▼ )
| Turns the power off.
ENTER - enters the selected cursor position.
Number Buttons Selects channel directly.
DISC Turns the menu on/off.
CONTROL
MODE
TV
TV/
CATV/
SAT